GALAX GeForce RTX™ 4090 ST V2 1-Click OC

• NVIDIA Ada Lovelace Streaming Multiprocessors: Up to 2x performance and power efficiency
• 4th Generation Tensor Cores: Up to 2X AI performance
• 3rd Generation RT Cores: Up to 2X ray tracing performance
• Microsoft DirectX® 12 Ultimate
• GDDR6X Graphics Memory
• NVIDIA DLSS
• NVIDIA® GeForce Experience™
• NVIDIA G-SYNC®
• NVIDIA GPU Boost™
• Game Ready Drivers
• Vulkan RT API, OpenGL 4.6
• DisplayPort 1.4a, HDMI 2.1
• HDCP 2.3
• VR Ready
• To 1-Click OC, overclock, control ARGB and monitor GPU info of your graphics cards in-App, please make sure your mobile device and PC are connected with the same WiFi network.

GPU Engine Specs:

• CUDA Cores: 16384
• Boost Clock: 2520MHz
• 1-Click OC Clock: 2535MHz (by installing Xtreme Tuner Plus Software and using 1-Click OC)

Memory Specs:

• Memory Speed: 21 Gbps
• Standard Memory Config: 24GB
• Memory Interface Width 384-bit GDDR6X
• Memory Bandwidth: 1008 GB/sec

Feature Support:

• PCI-E 4.0
• Windows 10/11 64-bit

Fan Feature:

• 3 * 102mm
• WING 2.0 with Fan stop @ Idle (All Fan)

Display Support:

• DisplayPort 1.4a x 3, HDMI 2.1 x 1

Dimensions:

• Dimensions(with Bracket): 352 * 153 * 74 mm
• Dimensions(without Bracket): 336 * 138 * 74 mm

In Box Accessories:

• 1-Click Sync Pro Cable * 2
• PCIe 16-pin to 4x PCIe 8-pin adaptor

1. PCI Express-compliant motherboard with one x16 graphics slot
2. System Space for 3.8-slot card required
3. PSU with native 450W PCIe Gen5 16-pin power connector, or minimum 3x PCIe 8-pin power connectors (use with included adapter)
   *450W PCIe Gen5 16-pin power connector or 3x PCIe 8-pin power connector when running in stock (450W TGP). For overclocked settings beyond 450W TGP, 600W PCIe Gen5 16-pin power connector or 4x PCIe 8-pin power connector will be required.
4. Minimum 850W or greater system power supply (Minimum is based on a PC configured with a Ryzen 9 5900X processor. Power requirements can be different depending on system configuration).
5. 32GB system memory recommended)
6. Microsoft Windows 10/11 64-bit (Build 2004 or later recommended)
7. 1-Clip Booster 2.0 Fan is 22mm x 130mm in height and length and is 193mm away measured from the graphics card bracket, please check your motherboard for compatibility before installation